The Sacramento County transportation department will fully close the Freeport Bridge to vehicle traffic on weekdays from November 2 through November 30, 2026, to repair the joint armor and bridge deck. Drivers crossing the Sacramento River between South River Road in Yolo County and Freeport Boulevard in Sacramento County must follow posted detours during closure hours.
The closure shapes any daytime trip through the river corridor this month, so travelers should shift crossings to evenings or weekends or add time for a signed detour. The county says the bridge will reopen to traffic each evening and remain open on Saturdays and Sundays while crews complete the work inside a one month window.
- Closure: Freeport Bridge over the Sacramento River, weekdays November 2 to 30, 2026.
- Hours: Weekday daytime; plan around 6 a.m. to 6 p.m. per the county work schedule.
- Detours: Paintersville Bridge on State Route 160 about 13 miles south, or north through West Sacramento.
- Open times: Evenings after work ends each weekday, plus all day Saturday and Sunday.
- Reason: Joint armor and deck repair on a movable bridge before winter storm season.
Closure Schedule for November 2 to 30
The shutdown begins Monday, November 2, and runs every weekday through Monday, November 30, with the bridge fully closed to vehicles during daytime work hours. Sacramento County sets the closure inside a one month timeframe because bridge openings may be needed for winter storms, and the repairs must finish first.
Travelers should treat the full 6 a.m. to 6 p.m. span as closed even though the county headline posts an 8 a.m. start for the vehicle closure. The county notice itself says the schedule was set for 6 a.m. to 6 p.m. to shorten the repair duration, and local reporting on the project describes a 6 a.m. to 6 p.m. weekday closure starting November 2.
Two Detours Across the Sacramento River
During closure hours, detour signs will direct drivers around the work area to the two nearest river crossings. Motorists heading to or from Clarksburg can drive about 13 miles south to the Paintersville Bridge on State Route 160 or head north through West Sacramento on Jefferson Boulevard.
Highway 160 restrictions add to the trip math because the bridge feeds directly into Freeport Boulevard and State Route 160 on the Sacramento County side. Drivers should allow extra time for either detour and check conditions before leaving, since additional roads may become impassable as work zones shift.
Why Repairs Run in November
The Freeport Bridge is one of six movable bridges in Sacramento County, and winter storms can require it to open for river traffic. County engineers scheduled the joint armor and deck repair for November because cooler weather and dark nights make night work impractical, and long daytime shifts compress the job into one month.
The project arrives after a long buildup, with county repair plans first approved in January and the start pushed back for months. Local coverage notes the bridge is a heavily used crossing, which explains why the county kept early, late and weekend travel open instead of closing the span around the clock.
What Clarksburg Travelers Should Do
Clarksburg sits about four miles south of the bridge, so winery visits, farm stand stops and Delta tasting rooms all route through this crossing on weekdays. Daytime visitors should either cross before the morning work window, wait until the evening reopening, or commit to the Paintersville Bridge route in both directions.
Commuters who rely on the bridge face the longest November, with every weekday daytime trip rerouted for four weeks. Weekend travel is unaffected, and the county says normal operations will return as soon as the work is complete, even if crews finish before November 30.
Evenings and Weekends Stay Open
The county designed the schedule to protect early, late and weekend travel, keeping the bridge open each weekday evening and all day Saturday and Sunday. Travelers with flexible plans get the simplest workaround by moving river crossings outside the daytime work window.
A county construction webcam follows the work zone for anyone who wants a live look before driving. Travelers crossing in the evening should still allow extra minutes on the first days, while drivers learn the detour signs and crews settle into the routine.
| If you… | What to do |
|---|---|
| Plan a weekday daytime trip through Clarksburg | Cross before 6 a.m., after 6 p.m., or take the Paintersville Bridge detour south. |
| Visit Delta wineries on a weekday | Allow extra time for the signed detour or move the visit to Saturday or Sunday. |
| Commute across the bridge daily | Shift travel outside 6 a.m. to 6 p.m. or reroute through West Sacramento for November. |
| Drive through on a weekend | Cross normally, since the bridge stays open all day Saturday and Sunday. |
November 2 is the first closure day. Confirm morning crossing times on Monday, because the first weekday sets the pattern for the month.
November 2 to 30 is the detour window. Use Paintersville Bridge or West Sacramento for every weekday daytime crossing.
November 30 is the scheduled reopening. Expect normal operations to return sooner if crews complete the deck repair early.
Is the Freeport Bridge closed on weekends in November 2026?
No. The bridge stays open all day Saturday and Sunday, and it reopens each weekday evening after work ends.
What are the Freeport Bridge closure hours on weekdays?
The county posts a full vehicle closure from 8 a.m. to 6 p.m. but describes a 6 a.m. to 6 p.m. work schedule, so travelers should plan around 6 a.m. to 6 p.m.
Which detour should Clarksburg visitors take?
Drivers can cross about 13 miles south at the Paintersville Bridge on State Route 160 or head north through West Sacramento on Jefferson Boulevard.
Why did the county schedule the repair for November?
The movable bridge may need to open for winter storms, so joint armor and deck repairs must finish in November while long daytime shifts are still practical.
Image Credits
- Lead Photo
Dicklyon · CC BY-SA 4.0 · edited












